View LP156WH2-TLQ2_6581609.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specification 1 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 specification for approval 15.6 hd tft lcd title model hp customer *when you obtain standard approval, please use the above model name without suffix lp156wh2 *model tlq2 suffix lg display co., ltd. supplier ) ) ( ( final specification preliminary specification please return 1 copy for your confirmation with your signature and comments. / / / signature approved by products engineering dept. lg display co., ltd prepared by reviewed by signature approved by k. j. kwon / s.manager s. r. kim / manager prepared by reviewed by signature approved by b. t. jang / engineer k. h. lee / engineer www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 2 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 contents 25 emc 7-2 21-23 appendix. lpl proposal for system cover design a 9-10 lvds signal timing specification 3-3 29-31 appendix. enhanced extended display identification data a 27-28 precautions 9 12 8 interface connections 3-2 color input data refernece 3-5 26 designation of lot mark 8-1 26 packing form 8-2 packing 8 25 environment 7-3 1 cover 2 contents 3 record of revisions 4 general description 1 5 absolute maximum ratings 2 electrical specifications 3 6-7 electrical charactreistics 3-1 11 signal timing specifications 3-3 11 signal timing waveforms 3-4 13 power sequence 3-6 14-16 optical sfecifications 4 17-20 mechanical characteristics 5 24 reliablity 6 international standards 7 25 safety 7-1 page item no www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 3 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 record of revisions final spec. all dec. 01. 2009 1.0 0.0 edid ver first draft (preliminary specification) - oct. 13, 2009 0.0 description page revision date revision no www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 4 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 1. general description general features yes rohs compliance hard coating(3h), glare treatment of the front pola rizer surface treatment 6-bit, 262,144 colors color depth 1366 horiz. by 768 vert. pixels rgb strip arrangement pixel format 200 cd/m 2 (typ.5 point) luminance, white total 5.4 w (max.) @ lcm circuit 1.7 w (max.), b/l input 3.7 w (max.) power consumption 450g (max.) weight transmissive mode, normally white display operating mode yes for all bfr / pvc / as free 0.252mm 0.252 mm pixel pitch 359.3(h, typ) 209.5(v, typ) 5.5(d,max) [mm] outline dimension 15.6 inches diagonal active screen size the lp156wh2 is a color active matrix liquid crysta l display with an integral light emitting diode (le d) backlight system. the matrix employs a-si thin film transistor as the active element. it is a transmis sive type display operating in the normally white mode. this tft-lcd has 15.6 inches diagonally measured active display area with hd resolution(768 vertical by 1366 horizontal pixel array). each pixel is div ided into red, green and blue sub-pixels or dots which are ar ranged in vertical stripes. gray scale or the brigh tness of the sub-pixel color is determined with a 6-bit g ray scale signal for each dot, thus, presenting a p alette of more than 262,144 colors. the lp156wh2 has been des igned to apply the interface method that enables low power, high speed, low emi. the lp156wh2 is int ended to support applications where thin thickness, low power are critical factors and graphic displays are important. in combination with the vertical arrangement of the sub-pixels, the lp156wh2 charact eristics provide an excellent flat display for offi ce automation products such as notebook pc. control & data power edid signal & power tft-lcd panel (hd, drd, tn) 1 timing control (tcon) block timing control (tcon) block user connector 40 pin eeprom block for edid eeprom block for edid source driver (bottom bent) led backlight assy tclks lvds 1port vcc led driver block led driver block fb power block power block dvcc, avdd vgh, vgl, gma m i n i - l v d s gip clks, dsc vout_led dvcc vled led_en pwm 768 1366 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 5 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 2. absolute maximum ratings the following are maximum values which, if exceeded , may cause faulty operation or damage to the unit. table 1. absolute maximum ratings storage operation 10 20 30 40 50 60 70 80 0 -20 dry bulb temperature [ ] 10 % 20 % 40 % 60 % 90% 80% 0 10 20 30 40 50 60 wet bulb temperature [ ] humidity[(%)rh] units 1 %rh 90 10 h op operating ambient humidity 1 %rh 90 10 h st storage humidity 1 c 60 -20 h st storage temperature 1 c 50 0 t op operating temperature at 25 5 c vdc 4.0 -0.3 vcc power input voltage max min parameter notes values symbol note : 1. temperature and relative humidity range a re shown in the figure below. wet bulb temperature should be 39 c max, and no condensation of water. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 6 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 3. electrical specifications 3-1. electrical characteristics the lp156wh2 requires two power inputs. the first logic is employed to power the lcd electronics and to drive the tft array and liquid crystal. the second backlight is the input about led bl.with led driver . mosaic 12 hrs - - 15,000 life time v 0.5 - 0 vled_en_l led_en low voltage v 5.3 - 3.0 vled_en_h led_en high voltage k 60 40 20 zpwm led_en impedance v 0.5 - 0 v pwm_l pwm low level voltage v 5.3 - 3.0 v pwm_h pwm high level voltage 11 hz 1000 - 200 fpwm pwm frequency k 60 40 20 zpwm pwm impedance 10 % 0.2 - 0 - pwm jitter 9 % 100 - 6 pwm duty ratio 8 ma 1500 - - iled_p led power inrush current 7 w 3.7 3.5 - pled led power consumption 7 ma - 290 - iled led power input current 6 v 20.0 12.0 7.0 vled led power input voltage backlight : ( with led driver) 5 110 100 90 zlvds lvds impedance 4 ma 1500 - - icc_p power supply inrush current 2 w 1.7 1.5 - pcc power consumption 2 ma 515 450 - icc power supply input current 1 v 3.6 3.3 3.0 vcc power supply input voltage logic : max typ min notes unit values symbol parameter table 2. electrical characteristics www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 7 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 3. this spec. is the max load condition for the cab le impedance designing. 4. the below figures are the measuring vcc condition and the vcc control block lgd used. the vcc condition is same the minimum of t1 at power on sequence. 5. this impedance value is needed to proper display and measured form lvds tx to the mating connector. 6. the measuring position is the connector of lcm a nd the test conditions are under 25 . 7. the current and power consumption with led drive r are under the vled = 12.0v , 25 , dimming of max luminance whereas white pattern is displayed an d fv is the frame frequency. 8. the below figures are the measuring vled conditio n and the vled control block lgd used. vled control block is same with vcc control block. 9. in case of duty ratio 1% ~ 5%, there is no func tional problem but flicker can be seen. 10. if jitter of pwm is bigger than maximum. it ma y cause flickering. 11. this spec. is not effective at 100% dimming rat io as an exception because it has dc level equivale nt to 0hz. in spite of acceptable range as defined, th e pwm frequency should be fixed and stable for more consistent brightness control at any specific level desired. 12. the life time is determined as the time at whic h brightness of led is 50% compare to that of minimu m value specified in table 9. 10% 90% 0.5ms 3.3v 0v 10% 90% 0.5ms 12.0v 0v rising time vcc rising time v led note) 1. the measuring position is the connector of lcm a nd the test conditions are under 25 , fv = 60hz, black pattern. 2. the specified icc current and power consumption a re under the vcc = 3.3v , 25 , fv = 60hz condition and mosaic pattern. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 8 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 3-2. interface connections table 3. module connector pin configuration (cn1) no connection nc 30 led power supply (7v-20v) vled 40 led power supply (7v-20v) vled 39 led power supply (7v-20v) vled 38 no connection nc 37 backlight on/off control bl_on 36 pwm for luminance control blim 35 no connection nc 34 led ground vled_gnd 33 led ground vled_gnd 32 no connection nc 20 ground gnd 19 positive lvds differential clock input odd_clkin+ 18 negative lvds differential clock input odd_clkin- 17 ground gnd 16 positive lvds differential data input odd_r in 2+ 15 negative lvds differential data input odd_r in 2- 14 ground gnd 13 positive lvds differential data input odd_r in 1+ 12 negative lvds differential data input odd_r in 1- 11 led ground vled_gnd 31 power supply, 3.3v typ. vcc 2 power supply, 3.3v typ. vcc 3 ddc 3.3v power v eedid 4 no connection nc 5 ddc clock clk eedid 6 ddc data data eedid 7 positive lvds differential data input odd_r in 0+ 9 no connection nc 1 negative lvds differential data input odd_r in 0- 8 ground gnd 10 ground gnd 22 no connection nc 23 no connection nc 24 ground gnd 25 no connection nc 26 no connection nc 27 ground gnd 28 no connection nc 29 notes description symbol pin nc no connection 21 1, interface chips 1.1 lcd : sw, sw0624 (lcd controller) including lvds receiver 1.2 system : thc63lvdf823a or equivalent * pin to pin compatible with lvds 2. connector 2.1 lcd :20455-040e-0x, i-pex or its compatibles 2.2 mating : 20453-040t-0x, i-pex or equivalent. 2.3 connector pin arrangement 1 40 [lcd module rear view] this lcd employs one interface connections, a 40 pi n connector is used for the module electronics inte rface and led driver. the electronics interface connector is a model 2045 5-040e-0x manufactured by i-pex. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 9 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 notes unit max min symbol description 85mhz > fclk 65mhz ps + 400 - 400 t skew lvds clock to data skew margin - - - 65mhz > fclk 25mhz % 3 - f dev maximum deviation of input clock frequency during ssc khz 200 - f mod maximum modulation frequency of input clock during ssc - 1/7 - 600 t clk + 1/7 t skew_eo lvds clock to clock skew margin (even to odd) ps + 600 t skew - v 2.1 0.3 v in lvds input voltage range - v 1.8 0.6 v cm lvds common mode voltage - mv 600 100 |v id | lvds differential voltage notes unit max min symb ol description 3-3-1. dc specification 3-3-2. ac specification 3-3. lvds signal timing specifications www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 10 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 < clock skew margin between channel > < lvds data format > 3-3-3. data format 1) lvds 1 port < spread spectrum > time f center f max f min f mod 1 f center * f dev freq. g0 r5 r4 r3 r2 r1 r0 b1 b0 g5 g4 g3 g2 g1 de vsync hsync b5 b4 b3 b2 x b7 b6 g7 g6 r7 r6 r1 r0 g2 g1 b3 b2 r7 r6 g0 b1 de x current (nth ) cycle r5 r4 b0 g5 vsync hsync b7 b6 r3 r2 g4 g3 b5 b4 g7 g6 previous (n-1)th cycle next (n+1)th cycle rclk+ ra+/- rb+/- rc+/- rd+/- www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 11 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 3-4. signal timing specifications table 6. timing table this is the signal timing required at the input of the user connector. all of the interface signal ti ming should be satisfied with the following specifications and spe cifications of lvds tx/rx for its proper operation. 3-5. signal timing waveforms condition : vcc =3.3v low: 0.3vcc high: 0.7vcc data enable, hsync, vsync hsync data enable vsync data enable t wh t hp t hfp t hbp t vp t wv t vbp t vfp t wha t wva t clk 0.5 vcc dclk 768 768 768 t wva width-active 1366 1366 1366 t wha width-active tclk 88 56 16 t hbp horizontal back porch 48 32 16 t hfp horizontal front porch thp 14 8 4 t vbp vertical back porch 3 2 1 t vfp vertical front porch thp 791 782 775 t vp period 5 4 2 t wv width 32 32 32 t wh width tclk 1526 1486 1430 t hp period hsync vsync data enable mhz 72.8 69.3 66.5 f clk frequency dclk note unit max typ min symbol item www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 12 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 3-6. color input data reference the brightness of each primary color (red,green and blue) is based on the 6-bit gray scale data input for the color ; the higher the binary input, the brighter t he color. the table below provides a reference for color versus data input. table 7. color data reference 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green (00) green 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 green (01) ... 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green (62) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 green (63) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (00) red 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 red (01) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 red (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 red (63) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (01) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (62) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 blue (63) blue (00) white yellow magenta cyan blue green red black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 basic color 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 blue msb lsb green msb lsb red msb lsb b 5 b 4 b 3 b 2 b 1 b 0 g 5 g 4 g 3 g 2 g 1 g 0 r 5 r 4 r 3 r 2 r 1 r 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue color input color data www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 13 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 note) 1. do not insert the mating cable when system turn on. 2. valid data have to meet 3-3. lvds signal timin g specifications 3. lvds, led_en and pwm need to be on pull-down con dition on invalid status. 4. lgd recommend the rising sequence of vled after the vcc and valid status of lvds turn on. table 6. power sequence table ms - - 0.5 t 12 ms - - 10 t 11 ms - - 0 t 10 ms - - 0 t 9 ms - - 10 t 8 max. typ. min. units value led parameter ms - - 200 t 5 ms - - 400 t 4 ms 10 - 3 t 7 ms - - 200 t 6 ms 50 - 0 t 3 ms 50 - 0 t 2 ms 10 - 0.5 t 1 max. typ. min. units value logic parameter 3-7. power sequence t 7 interface signal, v i lvds power supply input vcc 90% 10% 10% 0v 90% t 1 t 2 t 3 t 4 t 5 t 6 0v dimming control signal of led bl pwm 0v (low) t 8 led input voltage vled t 10 led on/off control signal led_en t 11 t 9 valid data 0v valid data 0v (off) 90% 10% t 12 90% 3.0v 3.0v www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 14 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 4. optical specification fig. 1 optical characteristic measurement equipment and method table 9. optical characteristics ta=25 c, vcc=3.3v, f v =60hz, f clk = 69.3mhz 5 viewing angle color coordinates 4 ms - 16 - tr r + tr d response time 0.132 0.102 0.072 by 0.343 0.313 0.283 wx white y axis, down ( f =270 ) y axis, up ( f =90 ) x axis, left ( f =180 ) x axis, right( f =0 ) degree - - 40 q r degree - - 40 q l degree - - 10 q u degree - - 30 q d blue 0.359 0.329 0.299 wy 6 gray scale green red 0.365 0.335 0.305 gx 0.614 0.584 0.554 gy 0.648 0.618 0.588 rx 0.385 0.355 0.325 ry 3 1.6 1.4 - d white luminance variation 0.180 0.150 0.120 bx max typ min 1 - - 500 cr contrast ratio 2 cd/m 2 - 200 170 l wh surface luminance, white parameter symbol notes units values lcd module optical stage(x,y) pritchard 880 or equivalent 50cm optical characteristics are determined after the un it has been on and stable for approximately 30 min utes in a dark environment at 25 c . the values specified are at an approximate distan ce 50cm from the lcd surface at a viewing angle of f and q equal to 0 . fig. 1 presents additional information concerning t he measurement equipment and method. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 15 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 100 l63 74.17 l55 12.21 l23 21.01 l31 34.82 l39 52.49 l47 5.36 l15 1.45 l7 0 l0 luminance [%] (typ) gray level note) 1. contrast ratio(cr) is defined mathematically as surface luminance with all white pixels contrast ratio = surface luminance with all black pixels 2. surface luminance is the average of 5 point acro ss the lcd surface 50cm from the surface with all pixels displaying white. for more information see fig 1. l wh = average(l 1 ,l 2 , l 5 ) 3. the variation in surface luminance , the panel t otal variation ( d white ) is determined by measuring l n at each test position 1 through 13 and then defined as followed numerical formula. for more information see fig 2. maximum(l 1 ,l 2 , l 13 ) d white = minimum(l 1 ,l 2 , l 13 ) 4. response time is the time required for the displ ay to transition from white to black (rise time, tr r ) and from black to white(decay time, tr d ). for additional information see fig 3. 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to t he lcd surface. for more information see fig 4. 6. gray scale specification * f v = 60hz www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 16 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 fig. 4 viewing angle normal y eye f q f = 0 , right f = 180 , left f = 270 , down f = 90 , up fig. 3 response time the response time is defined as the following figur e and shall be measured by switching the input sign al for black and white. tr r tr d 100 90 10 0 % optical response white black white : active area a : h/4 mm b : v/4 mm points: 13 points h,v active area 1 3 2 5 4 h a b v 6 7 8 9 10 11 12 13 10mm 10mm fig. 2 luminance www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 17 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 5. mechanical characteristics the contents provide general mechanical characteris tics for the model lp156wh2. in addition the figure s in the next page are detailed mechanical drawing of the lcd. 193.536 mm vertical hard coating(3h), glare treatment of the front polarizer surface treatment 450g (max.) weight 197.1 0.5mm vertical 209.5 0.5mm vertical 5.5mm (max) thickness 344.232 mm horizontal active display area 349.8 0.5mm horizontal bezel area 359.3 0.5mm horizontal outline dimension www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 18 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 note) unit:[mm], general tolerance: 0.5mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 19 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 note) unit:[mm], general tolerance: 0.5mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 20 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 [ detail description of side mounting screw ] notes : 1. screw plated through the method of non-e lectrolytic nickel plating is preferred to reduce possibility that results in vertical and/ or horizontal line defect due to the conductive particles from screw surface. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 21 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 lpl proposal for system cover design.(appendix) define define 1. rear side of lcm is sensitive against external stre ss,and previous check about interference is highly needed. 2.in case there is something from system cover come s into the boundary above,mechanical interference may cause the fos def ects. (eg: ripple, white spot..) check if antenna cable is sufficiently apart from t -con of lcd module. 2 1 gap check for securing the enough gap between lcm and system cover. no good good 1.if system antenna is overlapped with t-con,it mi ght be cause the noise. max thickness a boundary line sponge system cover lcm reflector side www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 22 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 lpl proposal for system cover design. 1.cof area needs to be handled with care. define 1 .at least 2.0mm of gap needs to be secured to preve nt the shock related defects. define 2.l type of hinge is recommended than i type unde r shock test. 2.good wire path design to system side. ok wire path is located between cofs. bad wire path overlapped with cof area. 4 3 gap check for securing the enough gap between lcm and system hinge. checking the path of the system wire. (i type) (l type) cof (d-ic) hinge gap:min2.0mm side mount screw hole (4ea) ok bad good #1 #2 #3 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 23 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 lpl proposal for system cover design. 1.cnt area is specially sensitive against external stress,and additional gap by cutting on system cover will be helpful on r emoving the ripple. 2.using a thinner cnt will be better. (eg: fpc type ) define 1.condition without bracket is good for mechanical noise,and can minimize the light leakage from deformation of bracket. define 2.the results shows that there is no difference bet ween the condition with or without bracket. securing additional gap on cnt area.. 6 5 using a bracket on the top of lcm is not recommend ed. with bracket without bracket user connector cable pathway. system cover inner side. user connector area. fpc:flexible printed circuit. cut a a-1 a~a-1 bracket www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 24 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 6. reliability environment test condition { result evaluation criteria } there should be no change which might affect the pr actical display function when the display quality test is conducted under normal operating condition. 0 ~ 10,000 feet (3,048m) 24hr 0 ~ 40,000 feet (12,192m) 24hr altitude operatin g storage / shipment 7 half sine wave, 180g, 2ms one shock of each six faces(i.e. run 180g 2ms for all six faces) shock test (non-operating) 6 sine wave, 10 ~ 500 ~ 10hz, 1.5g, 0.37oct/min 3 axis, 1hour/axis vibration test (non-operating) 5 ta= 0 c, 240h low temperature operation test 4 ta= 50 c, 50%rh, 240h high temperature operation test 3 ta= -20 c, 240h low temperature storage test 2 ta= 60 c, 240h high temperature storage test 1 conditions test item no. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 25 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 7. international standards 7-1. safety c) en 60950-1:2006 + a11:2009, european committee f or electrotechnical standardization (cenelec). information technology equipment - safety - part 1 : general requirements. a) ul 60950-1, second edition, underwriters laborat ories inc. information technology equipment - safety - part 1 : general requirements. b) can/csa c22.2 no.60950-1-07, second edition, c anadian standards association. information technology equipment - safety - part 1 : general requirements. d) iec 60950-1:2005, second edition, the internation al electrotechnical commission (iec). information technology equipment - safety - part 1 : general requirements. 7-3. environment a) rohs, directive 2002/95/ec of the european parli ament and of the council of 27 january 2003 7-2. emc a) ansi c63.4 american national standard for meth ods of measurement of radio-noise emissions from low-voltage electrical and electroni c equipment in the range of 9 khz to 40 ghz. american national standards institute (ansi), 2003. b) cispr 22 information technology equipment C radi o disturbance characteristics C limit and methods of measurement." international special comm ittee on radio interference (cispr), 2005. c) cispr 13 sound and television broadcast receive rs and associated equipment C radio disturbance characteristics C limits and method of measurement." international special committee on radio interference (cispr), 2006. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 26 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 8. packing 8-2. packing form a) package quantity in one box : 20 pcs b) box size : 482 x 358 x 275 8-1. designation of lot mark a) lot mark a b c d e f g h i j k l m a,b,c : size(inch) d : year e : month f ~ m : serial no. note 1. year 2. month mark year 0 2010 6 2006 7 2007 8 2008 9 2009 4 2004 5 2005 3 2 1 2003 2002 2001 b nov mark month a oct 6 jun 7 jul 8 aug 9 sep 4 apr 5 may c 3 2 1 dec mar feb jan b) location of lot mark serial no. is printed on the label. the label is at tached to the backside of the lcd module. this is subject to change without prior notice. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 27 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1. mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applie d to the module. and the case on which a module is mounted s hould have sufficient strength so that external force is not transmitted directly to the module. (3) please attach the surface transparent protectiv e plate to the surface in order to protect the pola rizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials fo r the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit b reak by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer s with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothe s with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials l ike chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lo wer temperature, it becomes longer.) (3) brightness depends on the temperature. (in lowe r temperature, it becomes lower.) and in lower temperature, response time(required ti me that brightness is stable after turned on) becom es longer. (4) be careful for condensation at sudden temperatu re change. condensation makes damage to polarizer o r electrical contacted parts. and after fading conden sation, smear or spot will occur. (5) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference sha ll be done by system manufacturers. grounding and shieldi ng methods may be important to minimized the interference. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 28 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make c ertain that treatment persons are connected to ground through w rist band etc. and dont touch interface pin direct ly. 9-3. electrostatic discharge control strong light exposure causes degradation of polariz er and color filter. 9-4. precautions for strong light exposure 9-5. storage (1) when the protection film is peeled off, static electricity is generated between the film and polar izer. this should be peeled off slowly and carefully by p eople who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) the protection film is attached to the polarize r with a small amount of glue. if some stress is ap plied to rub the protection film against the polarizer du ring the time you peel off the film, the glue is apt to remain on the polarizer. please carefully peel off the protection film witho ut rubbing it against the polarizer. (3) when the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the polarizer af ter the protection film is peeled off. (4) you can remove the glue easily. when the glue r emains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cot ton waste or other soft material like chamois soaked with normal-hexane. 9-6. handling precautions for protection film when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the m odule to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that they be stored in the contai ner in which they were shipped. www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 29 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 appendix a. enhanced extended display identificatio n data (eedid tm ) 1/3 LP156WH2-TLQ2 edid data _ ver. 0.0 2009.09.21 byte (dec) byte (hex) field name and comments value (hex) value (bin) 0 00 header 00 00000000 1 01 header ff 11111111 2 02 header ff 11111111 3 03 header ff 11111111 4 04 header ff 11111111 5 05 header ff 11111111 6 06 header ff 11111111 7 07 header 00 00000000 8 08 eisa manufacture code ( 3 character id ) lgd 30 00110000 9 09 eisa manufacture code (compressed asc ) e4 11100100 10 0a panel supplier reserved - product code 027ch 7c 01111100 11 0b ( hex. lsb first ) 02 00000010 12 0c lcd module serial no - preferred but optional ("0" if not used) 00 00000000 13 0d lcd module serial no - preferred but optional ("0" if not used) 00 00000000 14 0e lcd module serial no - preferred but optional ("0" if not used) 00 00000000 15 0f lcd module serial no - preferred but optional ("0" if not used) 00 00000000 16 10 week of manufacture 00 weeks 00 00000000 17 11 year of manufacture 2009 years 13 00010011 18 12 edid structure version # = 1 01 00000001 19 13 edid revision # = 3 03 00000011 20 14 video input definition = digital signal 80 10000000 21 15 max h image size (rounded cm) = 34 cm 22 00100010 22 16 max v image size (rounded cm) = 19 cm 13 00010011 23 17 display gamma = (gamma*100)-100 = example:(2.2*100) -100=120 = 2.2 gamma 78 01111000 24 18 feature support (no_dpms, no_active off/very low po wer, rgb color display, timing blk 1,no_ gtf) 0a 00001010 25 19 red/green low bits (rxry/gxgy) 4e 01001110 26 1a blue/white low bits (bxby/wxwy) 85 10000101 27 1b red x rx = 0.618 9e 10011110 28 1c red y ry = 0.355 5b 01011011 29 1d green x gx = 0.335 55 01010101 30 1e green y gy = 0.584 95 10010101 31 1f blue x bx = 0.150 26 00100110 32 20 blue y by = 0.094 18 00011000 33 21 white x wx = 0.313 50 01010000 34 22 white y wy = 0.329 54 01010100 35 23 established timing 1 (00h if not used) 00 00000000 36 24 established timing 2 (00h if not used) 00 00000000 37 25 manufacturer's timings (00h if not used) 00 00000000 38 26 standard timing id1 (01h if not used) 01 00000001 39 27 standard timing id1 (01h if not used) 01 00000001 40 28 standard timing id2 (01h if not used) 01 00000001 41 29 standard timing id2 (01h if not used) 01 00000001 42 2a standard timing id3 (01h if not used) 01 00000001 43 2b standard timing id3 (01h if not used) 01 00000001 44 2c standard timing id4 (01h if not used) 01 00000001 45 2d standard timing id4 (01h if not used) 01 00000001 46 2e standard timing id5 (01h if not used) 01 00000001 47 2f standard timing id5 (01h if not used) 01 00000001 48 30 standard timing id6 (01h if not used) 01 00000001 49 31 standard timing id6 (01h if not used) 01 00000001 50 32 standard timing id7 (01h if not used) 01 00000001 51 33 standard timing id7 (01h if not used) 01 00000001 52 34 standard timing id8 (01h if not used) 01 00000001 53 35 standard timing id8 (01h if not used) 01 00000001 header vendor / product edid version display parameters panel color coordinates establ ished timin gs standard timing id www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 30 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 appendix a. enhanced extended display identificatio n data (eedid tm ) 2/3 byte (dec) byte (hex) field name and comments value (hex) value (bin) 54 36 pixel clock/10,000 (lsb) 69.3 mhz @ 59.6hz 12 00010010 55 37 pixel clock/10,000 (msb) 1b 00011011 56 38 horizontal active (lower 8 bits) 1366 pixels 56 01010110 57 39 horizontal blanking(thp-ha) (low er 8 bits) 12 0 pixels 78 01111000 58 3a horizontal active / horizontal blanking(thp-ha) (up per 4:4bits) 50 01010000 59 3b vertical avtive 768 lines 00 00000000 60 3c vertical blanking (tvp-ha) (de blanking typ.for de only panels) 14 lines 0e 00001110 61 3d vertical active : vertical blanking (tvp-ha) (up per 4:4bits) 30 00110000 62 3e horizontal sync. offset (thfp) 32 pixels 20 00100000 63 3f horizontal sync pulse width (hspw) 32 pixels 20 00100000 64 40 vertical sync offset(tvfp) : sync width (vspw) 2 lines : 4 lines 24 00100100 65 41 horizontal vertical sync offset/width (upp er 2bits) 00 00000000 66 42 horizontal image size (mm) 344 mm 58 01011000 67 43 vertical image size (mm) 194 mm c2 11000010 68 44 horizontal image size / vertical image size 10 00010000 69 45 horizontal border = 0 (zero for notebook lcd) 00 00000000 70 46 vertical border = 0 (zero for notebook lcd) 00 00000000 71 47 non-interlace, normal display, no stereo, digital s eparate ( vsync_neg, hsync_neg ), de only note : ls b is set to '1' if panel is de-timing only. h/v can be ignored. 19 00011001 72 48 flag 00 00000000 73 49 flag 00 00000000 74 4a flag 00 00000000 75 4b data type tag (descriptor defined by manufacturer ) 00 00000000 76 4c flag 00 00000000 77 4d descriptor defined by manufacturer 00 00000000 78 4e descriptor defined by manufacturer 00 00000000 79 4f descriptor defined by manufacturer 00 00000000 80 50 descriptor defined by manufacturer 00 00000000 81 51 descriptor defined by manufacturer 00 00000000 82 52 descriptor defined by manufacturer 00 00000000 83 53 descriptor defined by manufacturer 00 00000000 84 54 descriptor defined by manufacturer 00 00000000 85 55 descriptor defined by manufacturer 00 00000000 86 56 descriptor defined by manufacturer 00 00000000 87 57 descriptor defined by manufacturer 00 00000000 88 58 descriptor defined by manufacturer 00 00000000 89 59 descriptor defined by manufacturer 00 00000000 90 5a flag 00 00000000 91 5b flag 00 00000000 92 5c flag 00 00000000 93 5d data type tag ( ascii string ) fe 11111110 94 5e flag 00 00000000 95 5f ascii string l 4c 01001100 96 60 ascii string g 47 01000111 97 61 ascii string 20 00100000 98 62 ascii string d 44 01000100 99 63 ascii string i 69 01101001 100 64 ascii string s 73 01110011 101 65 ascii string p 70 01110000 102 66 ascii string l 6c 01101100 103 67 ascii string a 61 01100001 104 68 ascii string y 79 01111001 105 69 manufacturer p/n(if<13 char--> 0ah, then terminate with asc code 0ah,set remaining char = 20h) 0a 00001010 106 6a manufacturer p/n(if<13 char--> 0ah, then terminate with asc code 0ah,set remaining char = 20h) 20 00100000 107 6b manufacturer p/n(if<13 char--> 0ah, then terminate with asc code 0ah,set remaining char = 20h) 20 00100000 timing descriptor #3 timing descriptor #1 timing descriptor #2 www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification 31 / 31 lp156wh2 liquid crystal display ver. 1.0 dec,01. 2009 appendix a. enhanced extended display identificatio n data (eedid tm ) 3/3 byte (dec) byte (hex) field name and comments value (hex) value (bin) 108 6c flag 00 00000000 109 6d flag 00 00000000 110 6e flag 00 00000000 111 6f data type tag ( monitor name, stored as ascii ) fc 11111100 112 70 flag 00 00000000 113 71 monitor name, stored as ascii l 4c 01001100 114 72 monitor name, stored as ascii p 50 01010000 115 73 monitor name, stored as ascii 1 31 00110001 116 74 monitor name, stored as ascii 5 35 00110101 117 75 monitor name, stored as ascii 6 36 00110110 118 76 monitor name, stored as ascii w 57 01010111 119 77 monitor name, stored as ascii h 48 01001000 120 78 monitor name, stored as ascii 2 32 00110010 121 79 monitor name, stored as ascii - 2d 00101101 122 7a monitor name, stored as ascii t 54 01010100 123 7b monitor name, stored as ascii l 4c 01001100 124 7c monitor name, stored as ascii q 51 01010001 125 7d monitor name, stored as ascii 2 32 00110010 126 7e extension flag (# of optional 128 panel id extensio n block to follow, typ = 0) 00 00000000 127 7f check sum (the 1-byte sum of all 128 bytes in this panel id block shall = 0) 28 00101000 timing descriptor #4 checksum www.datasheet.net/ datasheet pdf - http://www..co.kr/

▲Up To Search▲

Price & Availability of LP156WH2-TLQ2

	To Download LP156WH2-TLQ2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .